Cumberland, Hoke & Moore Counties

Exterior Painting & Weatherproofing

Targeted wash prep, PrimeRx peel-bonding primer, spray and back-roll acrylic coatings, and architectural trim finishing across Cumberland and Moore Counties.

Call (910) 476-1872 Text Photos of Your Home

Prep: Wash & Scrape Loose Paint Binding: Sherwin-Williams PrimeRx Peel Bonding Primer Application: Spray & Back-Roll Acrylic Penetration

Documented Exterior Transformations

Real-world gable restoration, outbuilding coatings, eave protection, and entryway enamel finishing.

Finished white screened patio with painted railings and trim in Fayetteville NC

Porch & Millwork

Screened Patio & Railing Finish

Full exterior coating across screened porch frames, porch support columns, handrails, and gutters in durable exterior white.

Barn workshop exterior painted red with white trim

Outbuilding Coating

Red Barn & Trim Detailing

Vertical siding coated in durable barn red with razor-sharp white casing trim around windows and eaves.

Freshly painted white soffit and fascia meeting brick wall

Eave Protection

Fascia & Soffit Weather-Sealing

Overhangs and frieze lines scraped, primed, and coated in pure white enamel along the brick roofline.

Front entryway door after being painted bright red

Entryway Focus

Front Door Enamel Restoration

Weathered green entryway door transformed with bold red enamel and crisp white sidelight millwork.

Clear finish applied to tongue and groove cedar ceiling

Wood Sealing

Cedar Porch Ceiling Clear Coating

Applying high-gloss protective sealant across natural wood ceiling planks and square cedar post wraps.

Security camera masked with plastic film during eave scraping and painting in Fayetteville NC

Site Protection

Hardware & Camera Masking

Exterior security cameras, downspouts, and electrical fixtures wrapped tight with poly and tape prior to scraping and spraying.

Barn showing signs of fading, chalking, and algae growth

Substrate Preparation

Scraping, Mildew Neutralization, and PrimeRx

In North Carolina's climate, fresh paint applied over mildew spores or failing primer will quickly blister. Exterior coatings depend entirely on the mechanical bond with the sound substrate below. We begin by treating surface organic growth with a dedicated mildew wash and scraping loose paint back to a firm edge.

Mildew Wash & Scraping: We neutralize mold and mildew spores before scraping flaking paint edges flat, ensuring new coatings adhere to clean wood.
Sherwin-Williams PrimeRx: For sun-baked, weathered siding with ridges and weathered edges, we apply PrimeRx Peel Bonding Primer. Its high-build formula bridges imperfections and locks down edges to prevent moisture intrusion.
Surrounding Property Protection: Drop cloths cover walkways, flower beds, and shrubs, while windows and doors are masked in plastic to protect glass and brick from overspray.

Home repainted cleanly in slate gray, with white trim and black shutters

Application Standards

Spray and Back-Roll Acrylic Penetration

A good exterior coating requires both even coverage and mechanical adhesion. Spraying alone can sit on top of weathered grain like a skin, leaving pockets where moisture can gather. Whenever the substrate profile requires it, we spray and back-roll to work wet paint directly into the surface.

Spray and Back-Roll Adhesion: We spray paint onto the substrate and immediately roll it back by hand, pressing the acrylic coating into wood grain, siding joints, and surface crevices.
100% Acrylic Exterior Topcoats: We apply high-grade acrylic latex formulations engineered to remain flexible through seasonal temperature shifts without cracking.
Crisp Architectural Trim Cut-Ins: Fascia boards, soffits, front columns, and doors are hand-cut with durable exterior trim enamel, establishing sharp separation against brick and siding.

Complete Exterior Painting Scope

Protecting residential siding, trim, outbuildings, and entryway millwork across Cumberland, Hoke, and Moore Counties.

Prep & Primer Binding

Mildew Wash: Treating algae and mold buildup across shaded siding, eaves, and foundation stems.
Hand Scraping: Scraping failing paint down to sound edges on weathered gables and fascia.
SW PrimeRx Bonding: High-build peel bonding primer sealing weathered grain and feathering rough ridges.
Ground & Glass Protection: Drop cloths over shrubs and walkways, with plastic masking on windows and doors.

Siding & Outbuildings

Spray & Back-Roll: Spraying even volume and back-rolling into siding grain and porous board profiles.
Hand Brush & Roll: Controlled brush and roller application where tight proximity requires precision.
Wood & HardiePlank Siding: Coating lap siding, board-and-batten, and fiber cement in flexible acrylics.
Barns & Workshops: Full-structure coating for detached garages, horse barns, and residential workshops.

Trim, Eaves & Doors

Fascia & Soffit Painting: Priming and coating roofline overhangs and frieze boards along masonry.
Porch Columns & Rails: Hand-cutting durable gloss and satin enamels on load-bearing posts and balusters.
Front Door Restoration: Enamel coatings on entry doors, side lights, and decorative surround mouldings.
Clear Wood Sealing: High-build clear finishes protecting natural tongue-and-groove porch ceilings.

Frequently Asked Questions

Direct answers on exterior preparation, primers, and back-rolling.

Why is a mildew wash necessary before painting?

Paint applied over mildew will eventually fail. Power washing alone often just blows surface grime around without killing the fungal spores living in the substrate. We apply a targeted mildew wash to eradicate the spores at the root before scraping and priming, ensuring the new paint bonds to a clean surface.

What is Sherwin-Williams PrimeRx, and when is it used?

PrimeRx is an exterior peel bonding primer designed for weathered, sun-baked, or previously peeling surfaces. When failing paint is scraped away, it leaves uneven ridges. PrimeRx seals bare wood, smooths rough transitions, and remains flexible to keep the surface sealed.

What does spray and back-roll mean, and why does it matter?

Spraying applies an even, continuous coat of paint, but on textured or weathered wood, paint can bridge across surface pores rather than penetrating them. Back-rolling means following right behind the sprayer with a roller to press the paint into grain, end cuts, and crevices, improving long-term adhesion.

How do you protect my landscaping, windows, and brick?

We use canvas drop cloths across walkways, decks, flower beds, and shrubs to catch drips. Windows, exterior lighting, door fixtures, and unpainted brickwork are masked off with painters tape and poly sheeting before any spray equipment is used.

How do I get an estimate for exterior painting?

Text clear photos of the sides of your home or outbuilding, along with close-ups of any weathered wood or peeling areas, to (910) 476-1872. We will review the scope and provide a straightforward estimate.